Dispensers

PPI Major Brands

Petroleum Parts Incorporated (PPI) is a standout in a very small group of companies in the United States who remanufacture petroleum dispensers. The benefits of buying a PPI remanufactured dispenser over a new or other remanufactured dispenser is the perfect marriage between unbeatable quality and cost savings. Our dispensers are backed by a one year warranty on parts and materials. The one year warranty is built on a foundation of meticulous attention to detail, including a 250-point inspection and quality control process. Get a glance at the process by watching the video, and check out some of the key points below. Not rebuilt. Not used. Not as-is. PPI dispensers are remanufactured from the ground up.

Click here for Current Inventory & Quote Request

Remanufactured Dispensers

Our remanufactured dispenser process provides a higher quality product than any of our competitors’. PPI remanufactures fuel & DEF dispensers from start to finish in our 30,000-square foot facility. Our cost is significantly lower than brand-new dispensers, with up to 70 percent savings over OEM. Our dispensers come with a standard 90-day or one-year warranty (exceptions apply).

If you are interested in searching for a remanufactured dispenser, select a manufacturer below for our current inventory. If you do not see what you need, don’t worry, we have a large network of providers and will find what you’re looking for. Just give us a call.

PPI Image Cover
Play

Tear Down

  • Remove all sheet metal and electronics
  • Degrease and clean frame
  • Remove old meters and valves
  • Install tested & rebuilt meters and valves

Old parts are replaced with tested reman or new parts.The frame is cleaned and repaired, or replaced with new where needed.

Paint

  • Surface inspection & repair
  • Pre-application prep & sanding
  • Professional application of automotive grade paint
  • Quality inspection

Not only do PPI’s pumps function like new, they also look new. The presentation is a big factor in customer satisfaction and a point of pride for our team.

Pre-Hydraulics

  • Clean interior electronic cabinet
  • Install buttons and electronics
  • Ensure pump can run hydraulics
  • Quality inspection

Cabinet gets overhauled back to new OEM quality. All electronic pieces are thoroughly tested at multiple points in the reman process.

Assembly

  • Printers
  • Keypads
  • Operating software
  • Card readers
  • Operational test & quality inspection

We never stop testing for quality. During assembly, every tested part is re-tested after installation.

100-Gallon Duoprime® Hydraulic Test

  • Calibrate meters
  • Validate no leakage of meters and valves
  • Test electronics at our in-house lab

This is a crucial step many reman providers skip, but hydraulic testing is a cornerstone of quality and accuracy that PPI provides.

Skinning

  • New OEM equivalent sheet metal
  • OEM Grade Graphics
  • Quality inspection
  • Wrap and ship

New sheet metal and graphics are the icing on the cake. The remanufactured pump operates and looks like new.

Dispenser Quote Request Form:

Fill out the form below to inquiry about purchasing. Alternatively call +1-800-521-0951

1) Personal Information

2) Dispenser Information

Model Required*
Type*
Model) Ovation 2*
Model) Ovation*
Model) 3V & 4V VISTA*
Model) Century*
Type*
Model) FlexPay Kits*
Model) Encore 700s*
Model) Encore 500s*
Model) Encore S DEF Kit*
Model) Encore 500 (original)*
Model) Encore 300*
Model) Legacy*
Model) Advantage*
If multiple selected please list required quantities
Do You Need The Upgraded NFC Contactless Tap Module?*
Do You Want To Be Able To Display Media Advertisements?*
Branded or Unbranded?*
Would You Link Information on Financing Options? **
Do you need valances?*
Max file size of 10mb – PDF, Images, and Videos accepted

Current Remanufactured Dispensers Inventory

Inventory Updated: September 30th, 2024

Click below to find the model you need:

Gilbarco

Many other Gilbarco models available – Please call!

QtyModelDescription
ManyFlexPayII5.7″ & 10.4″ Colored Screens, HCR’s Encore 500S/700S EMV Kits
CALLFlexPayIV5.7″ & 10.4″ Colored Screens, Contactless TAP, Encore 500S/700S EMV Kits
CALLFlexPayVIEncore 500S/700S EMV KITS
QtyModelDescription
3NA01 Hose 1 Product Dispenser
2NA12 Hose 2 Product Dispenser
3NA23 Hose 3 Product Dispenser
CallNC01 Hose 1 Product Suction Pump
3NG03+0 NON Blender (3-Inlets)
9NL13+1 Blender
1NL13+1 Blender E85 Blender
2NL24+1 Blender Dispenser
5NL33+1+1 3 Product Blender w/2 straight-grade nozzles
4NN13+0 Blender
2NP3 dualUltra-Hi Master/Master LC Meters 60 GPM
11NP3 singleUltra-Hi Single Sided Master LC Meter 60 GPM
3NP4Ultra-Hi Master/Slave Combo LC Meter 60 GPM
CallNP5Ultra-Hi Single Sided Satellite 60 GPM
11NPAUltra-Hi Master LC Meter 60 GPM with DEF
3NPBUltra-Hi Master/Slave Combo LC Meter 60 GPM with DEF
QtyModelDescription
12NA01 Hose 1 Product
10NA12 Hose 2 Product
10NA23 Hose 3 Product Dispenser
CallNC01 Hose 1 Product Suction Pump
5NG03+0 Non-Blender
15NL13+1 Blender
8NL33+1+1+1 3-Product Blender with 2-Straight grade nozzles
100NN13+0 Blender
6NP3 dualUltra-Hi Master/Master LC Meters 60 GPM
12NP3 singleUltra-Hi Single Sided Master LC Meter 60 GPM
8NP4 singleUltra-Hi Master/Slave Combo LC Meter 60 GPM
5NP5Ultra-Hi Single Sided Satellite 60 GPM
10NPAUltra-Hi Master LC Meter 60 GPM with DEF
8NPBUltra-Hi Master/Slave Combo LC Meter 60 GPM with DEF
QtyModelDescription
10Encore SRight Sided DEF Kit
25Encore SLeft Sided DEF Kit
QtyModelDescription
9NA01 Hose 1 Product
5NA12 Hose 2 Product
1NG03+0 Non-Blender
1NG13+1 Non-Blender
4NL13+1 Blender
11NN13+0 Blender
1NP3Ultra High Volume Master
1NP3Ultra High Volume Master/Master
2NP4Ultra High Master/Satellite Combo
1NP5Ultra High Volume Satellite
QtyModelDescription
CallNCO1 Hose 1 Product Suction
18NL13+1 Blender
30NN13+0 Blender
4NP3Ultra-Hi Master with LC Meter 60 GPM
5NP3Ultra-Hi Master/Master LC Meters 60 GPM
1NP5Ultra-Hi Single Satellite 60 GPM
QtyModelDescription
CallB31Single product Suction
CallB53Dual Product Suction
ManyB79/B7C3+0 & 3+1 Blenders
QtyModelDescription
1JH1001 Hose 1 Product Suction
CallJH11002 Hose 1 Product Suction
CallJH12002 Hose 2 Product Suction
CallJH15002 Hose 2 Product High Flow Suction
5JHA001 Hose 1 Product Dispenser
3JHA100/2002 Hose 1 or 2 Product Dispenser
6JHB3001 Hose 1 Product HV Master
11JHB410/JHB5102 Hose 1 or 2 Product High Flow Master Dispenser
5JHB6001 Hose Ultra High Volume Master Dispenser
3JHB8002 Hose 2 Product Ultra High Volume Master/Master Dispenser
15JHC6001 Hose Ultra High Volume Satellite Dispenser
6JHD8002 Hose 2 Product Ultra High Volume Master/Satellite Combo Dispenser

Wayne

QtyModelDescription
9B12/35.7″ & 10.4″ Colored Screens, HCR’s Encore 500S/700S EMV Kits
7B23/45.7″ & 10.4″ Colored Screens, Contactless TAP, Encore 500S/700S EMV Kits
1HS11/11Ultra-Hi Single Sided Master with LC Meter
3R11/1Single Product Dispenser
2R13/3Non-Blender 3+0 (3-Inlets)
QtyModelDescription
20B12/33+0 Blender Dispenser
12B23/43+1 Blender Dispenser
17R/22/22 Hose 2 Product Dispenser
10R11/11 Hose 1 Product Dispenser
12R13/33+0 Non-Blender Dispenser
QtyModelDescription
Call3V & 4V3+0, 3+1 Blenders
Call3V & 4VSingle, Dual and Blending Suctions Units
14HS3V387Ultra-Hi Master with LC Meter 60 GPM
6HS3V387Ultra-Hi Master/Master with LC Meters 60 GPM
15HS3V388Ultra-Hi Master/Salve Combo LC Meter 60 GPM
1HS4V387Ultra-Hi Master with LC Meter 60 GPM
1HS4V387Ultra-Hi Master/Master with LC Meters 60 GPM
1HS4V388Ultra-Hi Master/Salve Combo LC Meter 60 GPM
QtyModelDescription
13/2201DSingle Product Dispenser
33/G2007Single Satellite
Call3/G2201PSingle Product Side Load Suction
23/G2202DDual Hose 1 Product Dispenser
13/G2203DDual Hose Dual Product Dispenser
Call3/G2203PDual Hose 2 Product Suction
23/G2227Dual Hose Master/Master
43/G2228DSingle product High Flow Master Dispenser
Call3G2202PDual Hose 1 Product Suction
2G6201PSingle Hose Suction Mechanical

Tokheim

QuantityModelDescription
CallH311C-RHVS1 Hose Ultra High Volume Satellite 30″ Dispenser
CallH322C-RB33+0 Blender 30″ Dispenser with DPT
CallH322C-RHVM2 Hose 2 Product Ultra High Volume Master 30″ Dispenser with DPT
CallH322C-RHVMM2 Hose 2 Product Ultra High Volume Master/Master 30″ Dispenser with DPT
CallH322C-RHVMS2 Hose 2 Product Ultra High Volume Master/Satellite Combo 30″ Dispenser with DPT
CallH324C-R2 Hose 2 Product 30″ Dispenser with DPT
CallH422B-RB33+0 Blender Dispenser with DPT
CallH424B-RB3/43+1 Blender Dispenser with DPT
CallH424C-RB3/43+1 Blender Dispenser with DPT
CallH426B-R3 Hose 3 Product Dispenser with DPT
CallH426C-R3 Hose 3 Product Dispenser with DPT

We currently don’t have any remanufactured parts for Schlumberger. Please check back later.